Patient information
Palatal expansion with MARPE
What you may want to know about miniscrew-assisted palatal expansion: how it works, how it may help you, what happens during treatment and how to look after the appliance.
Your clinician decidesThis page is for general information only. Your clinician decides on the right treatment for you and its details; their instructions always come first.
01 / 08
What is MARPE?
MARPE (Miniscrew-Assisted Rapid Palatal Expansion) is an orthodontic treatment that widens the upper jaw. Small titanium mini screws placed in the palate attach the expansion appliance directly to the jaw bone.
-
01
One jaw, two halves
The upper jaw is made of two halves joined along the middle of the palate by a seam (the suture).
-
02
Controlled separation
As the screw on the appliance is turned regularly, the two halves slowly move apart. Over time the gap fills with new bone.
-
03
Force on the bone
Thanks to the mini screws, the expansion force is applied directly to the bone rather than to the teeth.
Illustrative animation; not to scale.
Maxilla model: BodyParts3D © DBCLS, CC BY-SA 2.1 JP (adapted)
In short: an appliance anchored to the palate widens the upper jaw by separating its two halves in a controlled way.
02 / 08
Why, and who is it for?
Your clinician may suggest palatal expansion when the upper jaw is narrow compared with the lower jaw. MARPE is an option considered especially during and after adolescence.
Crossbite
The upper back teeth bite inside the lower back teeth.
Crowding
Not enough room in the upper jaw for the teeth to line up.
Narrow palate
A narrow, high palate and a mismatch between the jaws.
A suture that changes with age
The palatal suture becomes tighter with age. In childhood, tooth-borne appliances are often enough; later, applying the force to the bone becomes more important.
Your clinician decidesWhether it suits you is decided by your clinician based on your age, bone structure and records (scan, tomography).
03 / 08
Possible benefits of MARPE
Compared with conventional tooth-borne expanders, these are MARPE’s main features.
Talk to your clinicianResults differ from person to person; talk to your clinician about what to expect.
-
01
Expansion in the bone
Because the force goes to the bone through the mini screws, the aim is for a larger share of the expansion to happen in the bone.
-
02
Less load on the teeth
As the teeth do not carry the force, tipping of the teeth and unwanted effects on the gums may be reduced.
-
03
An option after adolescence
It can be considered once the suture has tightened, in adolescents and in some young adults.
-
04
No surgical incision
For some patients it may be an alternative to surgically assisted expansion. Your clinician assesses whether it suits you.
-
05
Planned in advance
Screw positions can be planned digitally on the tomography and transferred to the mouth with a transfer tray.
-
06
Nasal floor
In some patients the floor of the nose widens along with the expansion. How this affects breathing varies from person to person and should be discussed with your clinician as a treatment goal.
04 / 08
Preparation: scan, tomography and planning
Before treatment your clinician records your teeth and jaw bone. These records are the basis for planning the best position for the screws.
-
01
Intraoral scan
Your teeth and palate are scanned with a small scanner to create your three-dimensional digital model (STL).
-
02
Tomography (CBCT)
Shows your bone in three dimensions; suitable bone areas for the screws are assessed from it.
-
03
Digital planning
Scan and tomography are combined on the computer, and the screw positions are planned on the bone.
-
04
Transfer tray
The plan is carried into the mouth with a tray with screw sleeves that seats on your teeth and palate.
Planning happens digitally first, not in the mouth; on the day of placement the plan is applied as designed.
05 / 08
Placement day
Placement is usually done in the clinic under local anaesthesia.
- 01
The palate is numbed with local anaesthesia.
- 02
The transfer tray is placed in the mouth; the position and direction of the screws are set as planned.
- 03
Depending on the bone, a small pilot channel may be drilled first; then the mini screws are placed in the palatal bone.
- 04
The appliance is attached to the screws and checked.
- 05
Your clinician shows you and a family member how to turn the appliance.
06 / 08
Activation: turning the appliance
Expansion happens by turning the screw on the appliance regularly with a special key.
Your clinician decidesOnly your clinician decides how often and how many turns.
- 01
Wash your hands and turn in a well-lit place.
- 02
Insert the key into the hole on the appliance.
- 03
Turn it in the direction and by the amount your clinician showed you.
- 04
Remove the key carefully and note the turn in a calendar.
Remember
If you missed a turn, do not make two turns at once; ask your clinician.
Related question: I forgot a turn. What should I do? →A feeling of pressure for a few minutes after turning is normal.
Keep the key out of the reach of children.
Bring your turning calendar to your check-ups.
07 / 08
What to expect
Treatment has an expansion, a stabilisation and a removal phase.
Your clinician decidesYour clinician sets the timings for you.
- ExaminationAssessment
- RecordsScan · CBCT
- PlanningDigital
- PlacementOne visit
- ActivationDays–weeks
- StabilisationMonths
- RemovalShort procedure
A gap between the front teeth
A gap opening between the upper front teeth during expansion is an expected sign. It usually reduces over time or is closed with orthodontic treatment.
Related question: A gap appeared between my front teeth. Is that normal? →Pressure
After turning you may feel temporary pressure in the palate, teeth, the bridge of the nose or the cheeks.
Speech and swallowing
During the first days speech and swallowing may change and you may have more saliva; this settles as the tongue gets used to the appliance.
Related question: Will my speech be affected? →Stabilisation
Once expansion is complete, the appliance stays in place for a while so new bone can form.
Removal
When the time is up, your clinician removes the appliance and the mini screws in a short procedure; your orthodontic treatment plan continues.
08 / 08
Care, eating and warning signs
While the appliance is in your mouth, good oral hygiene matters for your comfort and for the success of the treatment.
Brushing
Brush your teeth after every meal and gently clean around the appliance and the screws with a soft brush.
Rinsing
A water flosser or rinsing well with water helps remove food trapped under the appliance. If your clinician recommended a mouthwash, use it as instructed.
Eating
Avoid hard (nuts, ice), sticky (caramel, chewing gum) and very chewy foods; cut food into small pieces.
Habits
Do not bite on pens or nails. If you play contact sports, ask your clinician about a mouthguard.
?
Frequently asked questions
01Does MARPE hurt?
Placement is done under local anaesthesia. Afterwards, and after turning, you may feel pressure or tenderness; this is mostly temporary. Ask your clinician about pain relief.
02How long does treatment take?
The expansion phase usually takes a few weeks and the stabilisation phase a few months. Your clinician sets the exact timing for you.
03At what age is it used?
MARPE is mostly considered during and after adolescence. Your clinician decides based on your age, bone structure and the state of the palatal suture.
04Are the mini screws permanent?
No. They are removed together with the appliance when treatment is complete.
05A gap appeared between my front teeth. Is that normal?
Yes, it is expected during expansion. It usually reduces over time or is closed with orthodontic treatment. If you are worried, ask your clinician.
06I forgot a turn. What should I do?
Do not make two turns at once. Call your clinician and ask how to continue.
07Will my speech be affected?
Some sounds may change during the first days. Speech usually returns to normal soon as the tongue gets used to the appliance.
08Can I do sports?
You can continue most daily activities. For contact sports, ask your clinician about a mouthguard.
09What are the screws made of?
The mini screws are made of Titanium Grade 5, an alloy widely used in medical applications.
Your questions
Questions?
Ask your clinician about anything related to your treatment. The person who knows your case gives you the most accurate answer.
Product information for clinicians →